pot life

英 [pɒt laɪf] 美 [pɑːt laɪf]

储放(搁置)时间;(胶粘剂)适用期

化学



双语例句

  1. But the energy consumption will increases at the same time with the increase of pot life because of the increase of cathode voltage drops and of the decrease of current efficiency.
    电解槽寿命越长,电解槽的大修分摊成本越低;但随着电解槽槽龄增加,阴极压降的上升和电流效率的降低会造成吨铝电耗增加。
  2. The main disadvantage of paint with hardener added is its short pot life before the paint starts to gel.
    添加了硬化剂的油漆的主要弱点是短命,油漆来不及胶化。
  3. Never sigh or be captured by grief, throw all of your sorrows into the melting pot of life and cast a golden hope.
    莫叹息,别悲伤,把它们一齐投入生命的熔炉,铸炼成金色的希望。
  4. The department introduced a online repair technology can repair damaged side carbon block, which has the important significance to extending the pot life and reduce the overhaul cost.
    本文介绍了一种侧部炭块在线修理技术,可在线修补侧部炭块破损,对于延长槽寿命以及降低大修费用有着重要的意义。
  5. The soup is warming in the pot over the fire. The match flared to life, producing a warm glow on her hands.
    汤正在炉火上的锅里热着。火柴点着了,使她的双手感到一阵温热。
  6. The relationship between production cost and pot life for aluminum smelter;
    介绍了国外模具寿命、容积大小与金刚石生产成本的关系现状。
  7. "You know, the poplars have only just started growing, but sadly, the pot is broken* Just like life."
    “你知道的,青杨树林刚刚长起来,可惜罐子是破的,像生活一样。”
  8. The static night, I soak pot green tea, was thinking perhaps in the life, work all sorts.
    静静的夜,我泡一壶清茶,想着生活、工作中的种种。
  9. Pot Life of Epoxy Formula for Wet Winding
    湿法缠绕用环氧配方适用期研究
  10. Influence of Acid Anhydride on Pot Life of Low Density Elastomeric Silicone Ablators
    酸酐固化剂对硅橡胶低密度烧蚀材料施工期的影响
  11. Replacing traditional iron pot for galvanizing by dipping with pot built of refractory can greatly prolong its service life and improve galvanizing quality of steel wire.
    用耐火材料砌筑锌锅取代传统铁质锌锅可大大延长锌锅的使用寿命,并改善钢丝镀锌质量。
  12. Application of Aqueous Emulsifiable Isocyanate Adhesives for Wood-based Composites Investigation on the testing methods for pot life of aqueous polymer isocyanate adhesives
    异氰酸酯水乳液胶粘剂在木质复合材料中的应用水性聚合物乳液-异氰酸酯胶粘剂适用期测试方法研究
  13. Composition, curing mechanism, preparation of the sealant for polysulfide hollow glass, effects of pot life onits application property and effects of temperature, humidity, dosage of component B on its curability were presented.
    本文主要介绍了聚硫中空玻璃密封胶的构成、固化机理、制备方法,适用期对聚硫中空玻璃密封胶施工性能的影响,以及温湿度、B组分的用量对其硫化性能的影响。
  14. This paper studies the effect of the formulation of the cold curing epoxy copper powder electric conductive adhesive, curing temperature, curing velocity, using temperature pot life and storage life on the properties of the adhesive.
    本文研究了冷固化环氧型铜粉导电胶的配比、固化温度、固化速度、使用温度、各种介质、适用期和贮存期对性能的影响。
  15. The influence of several cross-linking agents on the performances of film of two-pack waterborne fluorocarbon resin paint is studied, in terms of reaction rate and pot life.
    从反应速度、适用时间等方面研究了几种交联剂对水性双组分氟涂料漆膜性能的影响。
  16. The experiments show that the mixture amines extend pot life of resin system and improve mechanical properties.
    实验结果表明此种混合芳香胺可延长树脂系统的使用期和提高它的力学性能。
  17. Investigation on the testing methods for pot life of aqueous polymer isocyanate adhesives
    水性聚合物乳液-异氰酸酯胶粘剂适用期测试方法研究
  18. The waterborne epoxy coating has long pot life about 6 h and short surface drying time about 1 h.
    表干时间较短,一般在1h左右;
  19. It had a long pot life when it was mixed with nickel powder.
    与镍粉混合稳定性好,适用期长;
  20. The paper analyses the effects of adhesive pot life, wood moisture content and environment temperature on the bonding quality of glued lumber.
    本文分析了胶合木用胶粘剂的适用期、木材含水率、环境温度等因素对胶合木胶合质量的影响。
  21. The influence of haa/ t-12 system on the pot-life of the propellant binder curing reaction
    HAA/T-12对推进剂粘结剂固化反应适用期的影响
  22. Data show that the injection temperature of the resin is 60 ℃, while the viscosity is only 0.24 Pa · s at that temperature and the pot life at 60 ℃ is more than 12h.
    结果表明,树脂的注射温度为60℃,此时粘度只有0.24Pa·s,工作期大于12h。
  23. By modifying the structure of coke pot and selecting the heat resisting steel, the destruction-resisting ability of coke pot is improved, the rigid property of pot body is enhanced, the life is prolonged, and the need of the CDQ production is also met.
    通过改进焦罐结构,选用耐热钢,提高了焦罐抵抗破坏的能力,增加了罐体的刚性,延长了焦罐的使用寿命,满足了干熄焦生产的需要。
  24. The influence of added way of catalyst and inhibitor on the pot life of casting PBX was evaluated by testing the viscosity of the HTPB TDI binder system. A proper proportion between T-12 and HAA was found to be 4 ∶ 1.
    通过测定HTPB-TDI黏结剂体系的黏度,评价了加入催化剂和抑制剂方式对浇注PBX黏结剂体系的适用期的影响,找出合适的T-12与HAA摩尔比为4∶1。
  25. Cathode material is the main part composition of the pot, which affects the pot life and pot energy consumption directly.
    阴极材料是铝电解槽的主要组成部分,阴极材料质量的好坏直接影响到电解槽寿命和电解槽的能量消耗。
  26. Composed MUF meets storing life, content of free formaldehyde, pot life and the moisture-resistance performance of the finish foil.
    合成出了在达到浸渍树脂贮存期、游离甲醛含量、适用期等要求下,满足预油漆纸的耐潮湿性的MUF浸渍树脂。
  27. In addition, the autocatalytic kinetic was dominated in the curing process. The matrix epoxy resin was modified by adding a kind of hyperbranched polyester to extend the pot life of the adhesive.
    通过对比拟合结果发现,在该复合模型的动力学反应过程中,自催化动力学占主导地位。为了达到延长胶粘剂适用期目的,我们通过加入超支化聚酯对基体环氧树脂进行了改性。
  28. Change regularity of& NCO content with time is systemically studied by adopting chemical analysis after the main agent of starch-based API is blended with cross-linking in proportion at room temperature and pot life of adhesive is determined.
    采用化学分析法,系统地研究室温下淀粉基API主剂与交联剂按比例混合后,&NCO含量随时间的变化规律,确定胶粘剂的活性期。